Federal Aviation Administration, DOT

Pt. 25, App. F

spaschal on DSK3GDR082PROD with CFR

(h) Report. The test report must include
the following for each specimen tested:
(1) Description of the specimen.
(2) Radiant heat flux to the specimen, expressed in W/cm2.
(3) Data giving release rates of heat (in kW/
m2 ) as a function of time, either graphically
or tabulated at intervals no greater than 10
seconds. The calibration factor (kn) must be
recorded.

(4) If melting, sagging, delaminating, or
other behavior that affects the exposed surface area or the mode of burning occurs,
these behaviors must be reported, together
with the time at which such behaviors were
observed.
(5) The peak heat release and the 2-minute
integrated heat release rate must be reported.

411

VerDate Sep<11>2014

12:50 Apr 30, 2019

Jkt 247046

PO 00000

Frm 00421

Fmt 8010

Sfmt 8002

Y:\SGML\247046.XXX

247046