Federal Aviation Administration, DOT

Pt. 36

cross-references to the Airworthiness Limitations section of the manual must also be
included. In addition, the applicant must include an inspection program that includes
the frequency and extent of the inspections
necessary to provide for the continued airworthiness of the propeller.
(7) Troubleshooting information describing
probable malfunctions, how to recognize
those malfunctions, and the remedial action
for those malfunctions.
(8) Information describing the order and
method of removing and replacing propeller
parts with any necessary precautions to be
taken.
(9) A list of the special tools needed for
maintenance other than for overhauls.
(b) Propeller Overhaul Section. (1) Disassembly information including the order
and method of disassembly for overhaul.
(2) Cleaning and inspection instructions
that cover the materials and apparatus to be
used and methods and precautions to be
taken during overhaul. Methods of overhaul
inspection must also be included.
(3) Details of all fits and clearances relevant to overhaul.
(4) Details of repair methods for worn or
otherwise substandard parts and components
along with information necessary to determine when replacement is necessary.
(5) The order and method of assembly at
overhaul.
(6) Instructions for testing after overhaul.
(7) Instructions for storage preparation including any storage limits.
(8) A list of tools needed for overhaul.
A35.4

PART 36 - NOISE STANDARDS: AIRCRAFT TYPE AND AIRWORTHINESS CERTIFICATION
Subpart A - General
Sec.
36.1 Applicability and definitions.
36.2 Requirements as of date of application.
36.3 Compatibility with airworthiness requirements.
36.5 Limitation of part.
36.6 Incorporations by reference.
36.7 Acoustical change: Transport category
large airplanes and jet airplanes.
36.9 Acoustical change: Propeller-driven
small airplanes and propeller-driven
commuter category airplanes.
36.11 Acoustical change: Helicopters.
36.13 Acoustical change: Tiltrotor aircraft.

Subpart B - Transport Category Large
Airplanes and Jet Airplanes
36.101 Noise measurement and evaluation.
36.103 Noise limits.
36.105 Flight Manual Statement of Chapter
4 equivalency.
36.106 Flight Manual statement of Chapter
14 noise level equivalency.

Subpart C [Reserved]
Subpart D - Noise Limits for Supersonic
Transport Category Airplanes
36.301

Noise limits: Concorde.

AIRWORTHINESS LIMITATIONS SECTION

The Instructions for Continued Airworthiness must contain a section titled Airworthiness Limitations that is segregated and
clearly distinguishable from the rest of the
document. This section must set forth each
mandatory replacement time, inspection interval, and related procedure required for
type certification. This section must contain
a legible statement in a prominent location
that reads:  - The Airworthiness Limitations
section is FAA approved and specifies maintenance required under SectionSection 43.16 and 91.403 of
the Federal Aviation Regulations unless an
alternative program has been FAA approved. - 

Subpart E [Reserved]
Subpart F - Propeller Driven Small Airplanes
and Propeller-Driven, Commuter Category Airplanes
36.501

Noise limits.

Subpart G [Reserved]
Subpart H - Helicopters
36.801
36.803
36.805

Noise measurement.
Noise evaluation and calculation.
Noise limits.

Subparts I-J [Reserved]

spaschal on DSK3GDR082PROD with CFR

[Amdt. 35-5, 45 FR 60182, Sept. 11, 1980, as
amended by Amdt. 35-6, 54 FR 34330, Aug. 18,
1989]

Subpart K - Tiltrotors
36.1101
36.1103

Noise measurement and evaluation.
Noise limits.

Subparts L-N [Reserved]

763

VerDate Sep<11>2014

12:50 Apr 30, 2019

Jkt 247046

PO 00000

Frm 00773

Fmt 8010

Sfmt 8006

Y:\SGML\247046.XXX

247046