Section 60.25

14 CFR Ch. I (1-1-19 Edition)
chapter for flight crewmember certification or qualification when there is a
missing, malfunctioning, or inoperative (MMI) component that is required to be present and correctly operate for the satisfactory completion of
that maneuver, procedure, or task.
(b) Each MMI component as described in paragraph (a) of this section,
or any MMI component installed and
required to operate correctly to meet
the current Statement of Qualification,
must be repaired or replaced within 30
calendar days, unless otherwise required or authorized by the NSPM.
(c) A list of the current MMI components must be readily available in or
adjacent to the FSTD for review by
users of the device. Electronic access
to this list via an appropriate terminal
or display in or adjacent to the FSTD
is satisfactory. The discrepancy log
may be used to satisfy this requirement provided each currently MMI
component is listed in the discrepancy
log.

(i) Twenty-one days have passed
since the sponsor notified the NSPM
and the TPAA of the proposed modification and the sponsor has not received any response from either the
NSPM or the TPAA;
(ii) Twenty-one days have passed
since the sponsor notified the NSPM
and the TPAA of the proposed modification and one has approved the proposed modification and the other has
not responded;
(iii) Fewer than twenty-one days
have passed since the sponsor notified
the NSPM and the TPAA of the proposed modification and the NSPM and
TPAA both approve the proposed modification;
(iv) The sponsor has successfully
completed any evaluation the NSPM
may require in accordance with the
standards for an evaluation for initial
qualification or any part thereof before
the modified FSTD is placed in service.
(2) The notification is submitted with
the content as, and in a form and manner as, specified in the applicable QPS.
(d) User notification. When a modification is made to an FSTD that affects
the Statement of Qualification, the
sponsor must post an addendum to the
Statement of Qualification until such
time as a permanent, updated statement is posted.
(e) MQTG update. The MQTG must be
updated with current objective test results in accordance with Section 60.15(h) and
(i) and appropriate objective data in
accordance with Section 60.13, each time an
FSTD is modified and an objective test
or other MQTG section is affected by
the modification. If an FSTD Directive
is the cause of this update, the direction to make the modification and the
record of the modification completion
must be filed in the MQTG.

Section 60.27 Automatic loss of qualification
and procedures for restoration of
qualification.
(a) An FSTD qualification is automatically lost when any of the following occurs:
(1) The FSTD is not used in the sponsor-s FAA-approved flight training program in accordance with Section 60.7(b)(5) or
(b)(6) and the sponsor does not obtain
and maintain the written statement as
described in Section 60.7(d)(2).
(2) The FSTD is not inspected in accordance with Section 60.19.
(3) The FSTD is physically moved
from one location and installed in a
different location, regardless of distance.
(4) The MQTG is missing or otherwise
not available and a replacement is not
made within 30 days.
(b) If FSTD qualification is lost
under paragraph (a) of this section,
qualification is restored when either of
the following provisions is met:
(1) The FSTD successfully passes an
evaluation:
(i) For initial qualification, in accordance with SectionSection 60.15 and 60.17(c) in
those circumstances where the NSPM
has determined that a full evaluation
for initial qualification is necessary; or

kpayne on VMOFRWIN702 with $$_JOB

[Docket No. FAA-2002-12461, 71 FR 63426, Oct.
30, 2006, as amended by Docket FAA-2014-
0391, Amdt. 60-4, 81 FR 18218, Mar. 30, 2016]

Section 60.25 Operation with missing, malfunctioning, or inoperative components.
(a) No person may knowingly use or
allow the use of or misrepresent the capability of an FSTD for any maneuver,
procedure, or task that is to be accomplished to meet training, evaluation, or
flight experience requirements of this

14

VerDate Sep<11>2014

16:30 Jun 25, 2019

Jkt 247047

PO 00000

Frm 00024

Fmt 8010

Sfmt 8010

Q:\14\14V2.TXT

PC31