Pt. 60, App. B

14 CFR Ch. I (1-1-19 Edition)

ATTACHMENT 1 TO APPENDIX B TO PART 60 - 
GENERAL FTD REQUIREMENTS
lllllllllllllllllllllll
BEGIN QPS REQUIREMENTS
1. REQUIREMENTS
a. Certain requirements included in this
appendix must be supported with an SOC as
defined in Appendix F, which may include
objective and subjective tests. The requirements for SOCs are indicated in the  - General
FTD Requirements -  column in Table B1A of
this appendix.
b. Table B1A describes the requirements
for the indicated level of FTD. Many devices
include operational systems or functions
that exceed the requirements outlined in
this section. In any event, all systems will be
tested and evaluated in accordance with this
appendix to ensure proper operation.
END QPS REQUIREMENTS
lllllllllllllllllllllll
BEGIN INFORMATION
2. DISCUSSION

kpayne on VMOFRWIN702 with $$_JOB

a. This attachment describes the general
requirements for qualifying Level 4 through
Level 6 FTDs. The sponsor should also consult the objectives tests in Attachment 2 of
this appendix and the examination of functions and subjective tests listed in Attach-

ment 3 of this appendix to determine the
complete requirements for a specific level
FTD.
b. The material contained in this attachment is divided into the following categories:
(1) General Flight deck Configuration.
(2) Programming.
(3) Equipment Operation.
(4) Equipment and facilities for instructor/
evaluator functions.
(5) Motion System.
(6) Visual System.
(7) Sound System.
c. Table B1A provides the standards for the
General FTD Requirements.
d. Table B1B provides the tasks that the
sponsor will examine to determine whether
the FTD satisfactorily meets the requirements for flight crew training, testing, and
experience, and provides the tasks for which
the simulator may be qualified.
e. Table B1C provides the functions that an
instructor/check airman must be able to control in the simulator.
f. It is not required that all of the tasks
that appear on the List of Qualified Tasks
(part of the SOQ) be accomplished during the
initial or continuing qualification evaluation.
END INFORMATION
lllllllllllllllllllllll

198

VerDate Sep<11>2014

16:30 Jun 25, 2019

Jkt 247047

PO 00000

Frm 00208

Fmt 8010

Sfmt 8002

Q:\14\14V2.TXT

PC31