kpayne on VMOFRWIN702 with $$_JOB VerDate Sep<11>2014 Not greater than two (2) arc minutes. N/A ......................................... An SOC is required and must include the appropriate calculations and an explanation of those calculations. Level B requires surface resolution not greater than three (3) arc minutes. X X When the eye is positioned on a 3Section glide slope at the slant range distances indicated with white runway markings on a black runway surface, the eye will subtend two (2) arc minutes: (1) A slant range of 6,876 ft with stripes 150 ft long and 16 ft wide, spaced 4 ft apart. (2) For Configuration A, a slant range of 5,157 feet with stripes 150 ft long and 12 ft wide, spaced 3 ft apart. (3) For Configuration B, a slant range of 9,884 feet, with stripes 150 ft long and 5.75 ft wide, spaced 5.75 ft apart. 4.f. .............. Light point size ...................... Not greater than five (5) arc minutes. N/A ......................................... An SOC is required and must include the relevant calculations and an explanation of those calculations. X X Light point size may be measured using a test pattern consisting of a centrally located single row of light points reduced in length until modulation is just discernible in each visual channel. A row of 48 lights will form a 4Section angle or less. 4.g. ............. Light point contrast ratio. Jkt 247047 Surface resolution. PO 00000 Frm 00369 Sfmt 8002 359 Fmt 8010 Q:\14\14V2.TXT PC31 4.g.1. .......... Not less than 10:1 ................. N/A ......................................... An SOC is required and must include the relevant calculations. X Pt. 60, App. C A 1Section spot photometer may be used to measure a square of at least 1Section filled with light points (where light point modulation is just discernible) and compare the results to the measured adjacent background. During contrast ratio testing, simulator aft-cab and flight deck ambient light levels should be zero. Federal Aviation Administration, DOT 16:30 Jun 25, 2019 4.e. .............