kpayne on VMOFRWIN702 with $$_JOB

VerDate Sep<11>2014
Jkt 247047
PO 00000
Frm 00373

X

Measurements are compared
to those taken during initial
qualification evaluation.

Sfmt 8002

363

Fmt 8010

Applicable only to Continuing
Qualification Evaluations. If
frequency response plots
are provided for each
channel at the initial evaluation, these plots may be
repeated at the continuing
qualification evaluation with
the following tolerances applied:
(a) The continuing qualification 1-3 octave band amplitudes must not exceed Section5
dB for three consecutive
bands when compared to
initial results.
(b) The average of the sum
of the absolute differences
between initial and continuing qualification results
must not exceed 2 dB
(refer to table C2C in Appendix C).

Federal Aviation Administration, DOT

16:30 Jun 25, 2019

Section5 dB on three (3) consecutive bands when compared
to initial evaluation; and Section2
dB when comparing the average of the absolute differences between initial
and continuing qualification
evaluation.

Q:\14\14V2.TXT
PC31

Pt. 60, App. C