kpayne on VMOFRWIN702 with $$_JOB

VerDate Sep<11>2014
QPS requirements

Information

Jkt 247047

Test

FTD level
Tolerances

Entry No.

Flight conditions

Test details

Title

PO 00000

1.

Performance

1.a. ........................

Engine Assessment.

Notes
5

7

X

X

X

X

Start Operations.

1.a.1.a. ..................

Engine start and acceleration (transient).

Light Off Time - Section10% or Section1 sec.
Torque - Section5% Rotor Speed - 
Section3% Fuel Flow - Section10% Gas
Generator Speed - Section5% Power
Turbine Speed - Section5% Gas Turbine Temp - Section30 SectionC.

Ground with the
Rotor Brake Used
and Not Used.

Record each engine start from
the initiation of the start sequence to steady state idle and
from steady state idle to operating RPM.

1.a.1.b. ..................

Steady State Idle and
Operating RPM conditions.

Torque - Section3% Rotor Speed - 
Section1.5% Fuel Flow - Section5% Gas
Generator Speed - Section2% Power
Turbine Speed - Section2% Turbine
Gas Temp - Section20 SectionC.

Ground .....................

Record both steady state idle and
operating RPM conditions. May
be a series of snapshot tests.

1.a.2. .....................

Power Turbine Speed
Trim.

Section10% of total change of power
turbine
speed;
or
Section0.5%
change of rotor speed.

Ground .....................

Record engine response to trim
system actuation in both directions.

X

X

1.a.3. .....................

Engine and Rotor Speed
Governing.

Torque - Section5%
Section1.5%.

Climb Descent ..........

Record results using a step input
to the collective. May be conducted concurrently with climb
and descent performance tests.

X

X

1.b. ........................

Reserved.

1.c. .........................

Takeoff.

442

Sfmt 8002
Q:\14\14V2.TXT

Rotor

Speed - 

X

PC31

14 CFR Ch. I (1-1-19 Edition)

1.a.1. .....................

Frm 00452
Fmt 8010

6

Pt. 60, App. D

16:30 Jun 25, 2019

TABLE D2A - FLIGHT TRAINING DEVICE (FTD) OBJECTIVE TESTS