kpayne on VMOFRWIN702 with $$_JOB

VerDate Sep<11>2014
QPS requirements

Information

Jkt 247047

Test

FTD level
Tolerances

Flight conditions

Test details

4.f. .........................

Light point size ..............

Not greater than five (5) arc-minutes.

N/A ...........................

An SOC is required and must include the relevant calculations.

4.g. ........................

Light point contrast ratio

.......................................................

...................................

.......................................................

Q:\14\14V2.TXT

4.g.1. .....................

Reserved.

4.g.2. .....................

........................................

Not less than 25:1 ........................

N/A ...........................

An SOC is required and must include the relevant calculations.

PC31

4.h. ........................

Visual ground segment.

Notes
5

6

7
X

Frm 00464

Light point size may be
measured using a test
pattern consisting of a
centrally located single
row of light points reduced in length until
modulation is just discernible in each visual
channel. A row of 48
lights will form a 4Section angle
or less.

Sfmt 8002

454

Fmt 8010

A 1Section spot photometer may
be used to measure a
square of at least 1Section filled
with light points (where
light point modulation is
just discernible) and
compare the results to
the measured adjacent
background. During contrast ratio testing, simulator aft-cab and flight
deck ambient light levels
should be zero.

X

14 CFR Ch. I (1-1-19 Edition)

Title

PO 00000

Entry No.

Pt. 60, App. D

16:30 Jun 25, 2019

TABLE D2A - FLIGHT TRAINING DEVICE (FTD) OBJECTIVE TESTS - Continued