12
14 CFR Ch. I (1–1–19 Edition)
§ 60.19
(ii) Not restored under § 60.27 for two
(2) years or more, then the qualifica-
tion basis (in terms of objective tests
and subjective tests) for the re-quali-
fication will be those standards in ef-
fect and current at the time of re-qual-
ification application.
(d) Except as provided in paragraph
(e) of this section, any change in FSTD
qualification level initiated on or after
May 30, 2008 requires an evaluation for
initial qualification in accordance with
this part.
(e) A sponsor may request that an
FSTD be permanently downgraded. In
such a case, the NSPM may downgrade
a qualified FSTD without requiring
and without conducting an initial eval-
uation for the new qualification level.
Subsequent continuing qualification
evaluations will use the existing
MQTG, modified as necessary to reflect
the new qualification level.
(f) When the sponsor has appropriate
validation data available and receives
approval from the NSPM, the sponsor
may adopt tests and associated toler-
ances described in the current quali-
fication standards as the tests and tol-
erances applicable for the continuing
qualification of a previously qualified
FSTD. The updated test(s) and toler-
ance(s) must be made a permanent part
of the MQTG.
[Doc. No. FAA–2002–12461, 71 FR 63426, Oct.
30, 2006; Amdt. 60–2, 72 FR 59599, Oct. 22, 2007,
as amended by Docket FAA–2014–0391, Amdt.
60–4, 81 FR 18218, Mar. 30, 2016]
§ 60.19
Inspection, continuing quali-
fication evaluation, and mainte-
nance requirements.
(a)
Inspection.
No sponsor may use or
allow the use of or offer the use of an
FSTD for flight crewmember training,
evaluation, or flight experience to
meet any of the requirements of this
chapter unless the sponsor does the fol-
lowing:
(1) Accomplishes all appropriate ob-
jective tests each year as specified in
the applicable QPS.
(2) Completes a functional preflight
check within the preceding 24 hours.
(b)
Continuing qualification evaluation.
(1) This evaluation consists of objec-
tive tests, and subjective tests, includ-
ing general FSTD requirements, as de-
scribed in the applicable QPS or as
may be amended by an FSTD Direc-
tive.
(2) The sponsor must contact the
NSPM to schedule the FSTD for con-
tinuing qualification evaluations not
later than 60 days before the evalua-
tion is due.
(3) The sponsor must provide the
NSPM access to the objective test re-
sults in the MQTG and access to the
FSTD for the length of time necessary
for the NSPM to complete the required
continuing qualification evaluations.
(4) The frequency of NSPM-conducted
continuing qualification evaluations
for each FSTD will be established by
the NSPM and specified in the State-
ment of Qualification.
(5) Continuing qualification evalua-
tions conducted in the 3 calendar
months before or after the calendar
month in which these continuing quali-
fication evaluations are required will
be considered to have been conducted
in the calendar month in which they
were required.
(6) No sponsor may use or allow the
use of or offer the use of an FSTD for
flight crewmember training or evalua-
tion or for obtaining flight experience
for the flight crewmember to meet any
requirement of this chapter unless the
FSTD has passed an NSPM-conducted
continuing qualification evaluation
within the time frame specified in the
Statement of Qualification or within
the grace period as described in para-
graph (b)(5) of this section.
(c)
Maintenance.
The sponsor is re-
sponsible for continuing corrective and
preventive maintenance on the FSTD
to ensure that it continues to meet the
requirements of this part and the appli-
cable QPS appendix. No sponsor may
use or allow the use of or offer the use
of an FSTD for flight crewmember
training, evaluation, or flight experi-
ence to meet any of the requirements
of this chapter unless the sponsor does
the following:
(1) Maintains a discrepancy log.
(2) Ensures that, when a discrepancy
is discovered, the following require-
ments are met:
(i) A description of each discrepancy
is entered in the log and remains in the
log until the discrepancy is corrected
as specified in § 60.25(b).
VerDate Sep<11>2014
16:30 Jun 25, 2019
Jkt 247047
PO 00000
Frm 00022
Fmt 8010
Sfmt 8010
Q:\14\14V2.TXT
PC31
kpayne on VMOFRWIN702 with $$_JOB