537
Federal Aviation Administration, DOT
§ 61.55
comply with the following application
and pilot certification procedures:
(1) The person who provided the
training must sign the applicant’s log-
book or training record after each les-
son in accordance with § 61.51(h)(2) of
this part. In lieu of the trainer, it is
permissible for a qualified management
official within the organization to sign
the applicant’s training records or log-
book and make the required endorse-
ment. The qualified management offi-
cial must hold the position of Chief
Pilot, Director of Training, Director of
Operations, or another comparable
management position within the orga-
nization that provided the training and
must be in a position to verify the ap-
plicant’s training records and that the
training was given.
(2) The trainer or qualified manage-
ment official must make an endorse-
ment in the applicant’s logbook that
states ‘‘[Applicant’s Name and Pilot
Certificate Number] has demonstrated
the skill and knowledge required for
the safe operation of the [Type of Air-
craft], relevant to the duties and re-
sponsibilities of a second in com-
mand.’’
(3) If the applicant’s flight experience
and/or training records are in an elec-
tronic form, the applicant must pro-
vide a paper copy of those records con-
taining the signature of the trainer or
qualified management official to a
Flight Standards office, an Examiner,
or an Aircrew Program Designee.
(4) The applicant must complete and
sign an Airman Certificate and/or Rat-
ing Application, FAA Form 8710–1, and
present the application to a Flight
Standards office or to an Examiner or
to an authorized Aircrew Program Des-
ignee.
(5) The person who provided the
ground and flight training to the appli-
cant must sign the ‘‘Instructor’s Rec-
ommendation’’ section of the Airman
Certificate and/or Rating Application,
FAA Form 8710–1. In lieu of the trainer,
it is permissible for a qualified man-
agement official within the organiza-
tion to sign the applicant’s FAA Form
8710–1.
(6) The applicant must appear in per-
son at a Flight Standards office or to
an Examiner or to an authorized Air-
crew Program Designee with his or her
logbook/training records and with the
completed and signed FAA Form 8710–
1.
(7) There is no practical test required
for the issuance of the ‘‘SIC Privileges
Only’’ pilot type rating.
(f) The familiarization training re-
quirements of paragraph (b) of this sec-
tion do not apply to a person who is:
(1) Designated and qualified as pilot
in command under subpart K of part 91,
part 121, 125, or 135 of this chapter in
that specific type of aircraft;
(2) Designated as the second in com-
mand under subpart K of part 91, part
121, 125, or 135 of this chapter in that
specific type of aircraft;
(3) Designated as the second in com-
mand in that specific type of aircraft
for the purpose of receiving flight
training required by this section, and
no passengers or cargo are carried on
the aircraft; or
(4) Designated as a safety pilot for
purposes required by § 91.109 of this
chapter.
(g) The holder of a commercial or air-
line transport pilot certificate with the
appropriate category and class rating
is not required to meet the require-
ments of paragraph (b)(2) of this sec-
tion, provided the pilot:
(1) Is conducting a ferry flight, air-
craft flight test, or evaluation flight of
an aircraft’s equipment; and
(2) Is not carrying any person or
property on board the aircraft, other
than necessary for conduct of the
flight.
(h) For the purpose of meeting the re-
quirements of paragraph (b) of this sec-
tion, a person may serve as second in
command in that specific type aircraft,
provided:
(1) The flight is conducted under day
VFR or day IFR; and
(2) No person or property is carried
on board the aircraft, other than nec-
essary for conduct of the flight.
(i) The training under paragraphs (b)
and (d) of this section and the training,
proficiency check, and competency
check under paragraph (e) of this sec-
tion may be accomplished in a flight
simulator that is used in accordance
with an approved training course con-
ducted by a training center certificated
under part 142 of this chapter or under
VerDate Sep<11>2014
16:30 Jun 25, 2019
Jkt 247047
PO 00000
Frm 00547
Fmt 8010
Sfmt 8002
Q:\14\14V2.TXT
PC31
kpayne on VMOFRWIN702 with $$_JOB