Section 91.1431

14 CFR Ch. I (1-1-19 Edition)

person with whom it arranges to perform required inspections maintains, a
current listing of persons who have
been trained, qualified, and authorized
to conduct required inspections. The
persons must be identified by name, occupational title, and the inspections
that they are authorized to perform.
The program manager (or person with
whom it arranges to perform its required inspections) must give written
information to each person so authorized, describing the extent of that person-s responsibilities, authorities, and
inspectional limitations. The list must
be made available for inspection by the
Administrator upon request.
Section 91.1431 CAMP: Continuing analysis
and surveillance.

kpayne on VMOFRWIN702 with $$_JOB

(a) Each program manager who maintains program aircraft under a CAMP
must establish and maintain a system
for the continuing analysis and surveillance of the performance and effectiveness of its inspection program and the
program covering other maintenance,
preventive maintenance, and alterations and for the correction of any deficiency in those programs, regardless
of whether those programs are carried
out by employees of the program manager or by another person.
(b) Whenever the Administrator finds
that the programs described in paragraph (a) of this section does not contain adequate procedures and standards
to meet this part, the program manager must, after notification by the
Administrator, make changes in those
programs requested by the Administrator.
(c) A program manager may petition
the Administrator to reconsider the
notice to make a change in a program.
The petition must be filed with the Executive Director, Flight Standards
Service, within 30 days after the program manager receives the notice. Except in the case of an emergency requiring immediate action in the interest of safety, the filing of the petition
stays the notice pending a decision by
the Administrator.
[Docket No. FAA-2001-10047, 68 FR 54561,
Sept. 17, 2003, as amended by Docket FAA-
2018-0119, Amdt. 91-350, 83 FR 9171, Mar. 5,
2018]

Section 91.1433 CAMP: Maintenance and preventive maintenance training program.
Each program manager who maintains program aircraft under a CAMP
or a person performing maintenance or
preventive maintenance functions for
it must have a training program to ensure that each person (including inspection personnel) who determines the
adequacy of work done is fully informed about procedures and techniques and new equipment in use and is
competent to perform that person-s duties.
Section 91.1435 CAMP:
ments.

Certificate

(a) Except for maintenance, preventive maintenance, alterations, and required inspections performed by repair
stations located outside the United
States certificated under the provisions of part 145 of this chapter, each
person who is directly in charge of
maintenance, preventive maintenance,
or alterations for a CAMP, and each
person performing required inspections
for a CAMP must hold an appropriate
airman certificate.
(b) For the purpose of this section, a
person  - directly in charge -  is each person assigned to a position in which
that person is responsible for the work
of a shop or station that performs
maintenance, preventive maintenance,
alterations, or other functions affecting airworthiness. A person who is directly in charge need not physically
observe and direct each worker constantly but must be available for consultation and decision on matters requiring instruction or decision from
higher authority than that of the person performing the work.
Section 91.1437 CAMP: Authority to perform
and approve maintenance.
A program manager who maintains
program aircraft under a CAMP may
employ maintenance personnel, or
make arrangements with other persons
to perform maintenance and preventive
maintenance as provided in its maintenance manual. Unless properly certificated, the program manager may not
perform or approve maintenance for return to service.

836

VerDate Sep<11>2014

16:30 Jun 25, 2019

Jkt 247047

PO 00000

Frm 00846

Fmt 8010

require-

Sfmt 8010

Q:\14\14V2.TXT

PC31