801
Federal Aviation Administration, DOT
§ 91.1015
§ 91.1015
Management specifications.
(a) Each person conducting oper-
ations under this subpart or furnishing
fractional ownership program manage-
ment services to fractional owners
must do so in accordance with manage-
ment specifications issued by the Ad-
ministrator to the fractional ownership
program manager under this subpart.
Management specifications must in-
clude:
(1) The current list of all fractional
owners and types of aircraft, registra-
tion markings and serial numbers;
(2) The authorizations, limitations,
and certain procedures under which
these operations are to be conducted,
(3) Certain other procedures under
which each class and size of aircraft is
to be operated;
(4) Authorization for an inspection
program approved under § 91.1109, in-
cluding the type of aircraft, the reg-
istration markings and serial numbers
of each aircraft to be operated under
the program. No person may conduct
any program flight using any aircraft
not listed.
(5) Time limitations, or standards for
determining time limitations, for over-
hauls, inspections, and checks for air-
frames, engines, propellers, rotors, ap-
pliances, and emergency equipment of
aircraft.
(6) The specific location of the pro-
gram manager’s principal base of oper-
ations and, if different, the address
that will serve as the primary point of
contact for correspondence between the
FAA and the program manager and the
name and mailing address of the pro-
gram manager’s agent for service;
(7) Other business names the program
manager may use;
(8) Authorization for the method of
controlling weight and balance of air-
craft;
(9) Any authorized deviation and ex-
emption granted from any requirement
of this chapter; and
(10) Any other information the Ad-
ministrator determines is necessary.
(b) The program manager may keep
the current list of all fractional owners
required by paragraph (a)(1) of this sec-
tion at its principal base of operation
or other location approved by the Ad-
ministrator and referenced in its man-
agement specifications. Each program
manager shall make this list of owners
available for inspection by the Admin-
istrator.
(c) Management specifications issued
under this subpart are effective un-
less—
(1) The management specifications
are amended as provided in § 91.1017; or
(2) The Administrator suspends or re-
vokes the management specifications.
(d) At least 30 days before it proposes
to establish or change the location of
its principal base of operations, its
main operations base, or its main
maintenance base, a program manager
must provide written notification to
the Flight Standards office that issued
the program manager’s management
specifications.
(e) Each program manager must
maintain a complete and separate set
of its management specifications at its
principal base of operations, or at a
place approved by the Administrator,
and must make its management speci-
fications available for inspection by
the Administrator and the fractional
owner(s) to whom the program man-
ager furnishes its services for review
and audit.
(f) Each program manager must in-
sert pertinent excerpts of its manage-
ment specifications, or references
thereto, in its program manual and
must—
(1) Clearly identify each such excerpt
as a part of its management specifica-
tions; and
(2) State that compliance with each
management specifications require-
ment is mandatory.
(g) Each program manager must keep
each of its employees and other persons
who perform duties material to its op-
erations informed of the provisions of
its management specifications that
apply to that employee’s or person’s
duties and responsibilities.
(h) A program manager may obtain
approval to provide a temporary docu-
ment verifying a flightcrew member’s
airman certificate and medical certifi-
cate privileges under an approved cer-
tificate verification plan set forth in
the program manager’s management
specifications. A document provided by
the program manager may be carried
as an airman certificate or medical
VerDate Sep<11>2014
16:30 Jun 25, 2019
Jkt 247047
PO 00000
Frm 00811
Fmt 8010
Sfmt 8010
Q:\14\14V2.TXT
PC31
kpayne on VMOFRWIN702 with $$_JOB