30
14 CFR Ch. I (1–1–19 Edition)
§ 119.63
(c) Within 30 days after a certificate
holder terminates operations under
part 135 of this chapter, the operating
certificate and operations specifica-
tions must be surrendered by the cer-
tificate holder to the responsible
Flight Standards office.
[Docket No. 28154, 60 FR 65913, Dec. 20, 1995,
as amended by Docket FAA–2018–0119, Amdt.
119–19, 83 FR 9172, Mar. 5, 2018]
§ 119.63
Recency of operation.
(a) Except as provided in paragraph
(b) of this section, no certificate holder
may conduct a kind of operation for
which it holds authority in its oper-
ations specifications unless the certifi-
cate holder has conducted that kind of
operation within the preceding number
of consecutive calendar days specified
in this paragraph:
(1) For domestic, flag, or commuter
operations—30 days.
(2) For supplemental or on-demand
operations—90 days, except that if the
certificate holder has authority to con-
duct domestic, flag, or commuter oper-
ations, and has conducted domestic,
flag or commuter operations within the
previous 30 days, this paragraph does
not apply.
(b) If a certificate holder does not
conduct a kind of operation for which
it is authorized in its operations speci-
fications within the number of cal-
endar days specified in paragraph (a) of
this section, it shall not conduct such
kind of operation unless—
(1) It advises the Administrator at
least 5 consecutive calendar days be-
fore resumption of that kind of oper-
ation; and
(2) It makes itself available and ac-
cessible during the 5 consecutive cal-
endar day period in the event that the
FAA decides to conduct a full inspec-
tion reexamination to determine
whether the certificate holder remains
properly and adequately equipped and
able to conduct a safe operation.
[Doc. No. 28154, 60 FR 65913, Dec. 20, 1995, as
amended by Amdt. 119–2, 61 FR 30434, June
14, 1996]
§ 119.65
Management personnel re-
quired for operations conducted
under part 121 of this chapter.
(a) Each certificate holder must have
sufficient qualified management and
technical personnel to ensure the high-
est degree of safety in its operations.
The certificate holder must have quali-
fied personnel serving full-time in the
following or equivalent positions:
(1) Director of Safety.
(2) Director of Operations.
(3) Chief Pilot.
(4) Director of Maintenance.
(5) Chief Inspector.
(b) The Administrator may approve
positions or numbers of positions other
than those listed in paragraph (a) of
this section for a particular operation
if the certificate holder shows that it
can perform the operation with the
highest degree of safety under the di-
rection of fewer or different categories
of management personnel due to—
(1) The kind of operation involved;
(2) The number and type of airplanes
used; and
(3) The area of operations.
(c) The title of the positions required
under paragraph (a) of this section or
the title and number of equivalent po-
sitions approved under paragraph (b) of
this section shall be set forth in the
certificate holder’s operations speci-
fications.
(d) The individuals who serve in the
positions required or approved under
paragraph (a) or (b) of this section and
anyone in a position to exercise control
over operations conducted under the
operating certificate must—
(1) Be qualified through training, ex-
perience, and expertise;
(2) To the extent of their responsibil-
ities, have a full understanding of the
following materials with respect to the
certificate holder’s operation—
(i) Aviation safety standards and safe
operating practices;
(ii) 14 CFR Chapter I (Federal Avia-
tion Regulations);
(iii) The certificate holder’s oper-
ations specifications;
(iv) All appropriate maintenance and
airworthiness requirements of this
chapter (e.g., parts 1, 21, 23, 25, 43, 45,
47, 65, 91, and 121 of this chapter); and
(v) The manual required by § 121.133
of this chapter; and
(3) Discharge their duties to meet ap-
plicable legal requirements and to
maintain safe operations.
(e) Each certificate holder must:
VerDate Sep<11>2014
08:20 May 17, 2019
Jkt 247048
PO 00000
Frm 00040
Fmt 8010
Sfmt 8010
Y:\SGML\247048.XXX
247048