Section 119.63

14 CFR Ch. I (1-1-19 Edition)
technical personnel to ensure the highest degree of safety in its operations.
The certificate holder must have qualified personnel serving full-time in the
following or equivalent positions:
(1) Director of Safety.
(2) Director of Operations.
(3) Chief Pilot.
(4) Director of Maintenance.
(5) Chief Inspector.
(b) The Administrator may approve
positions or numbers of positions other
than those listed in paragraph (a) of
this section for a particular operation
if the certificate holder shows that it
can perform the operation with the
highest degree of safety under the direction of fewer or different categories
of management personnel due to - 
(1) The kind of operation involved;
(2) The number and type of airplanes
used; and
(3) The area of operations.
(c) The title of the positions required
under paragraph (a) of this section or
the title and number of equivalent positions approved under paragraph (b) of
this section shall be set forth in the
certificate holder-s operations specifications.
(d) The individuals who serve in the
positions required or approved under
paragraph (a) or (b) of this section and
anyone in a position to exercise control
over operations conducted under the
operating certificate must - 
(1) Be qualified through training, experience, and expertise;
(2) To the extent of their responsibilities, have a full understanding of the
following materials with respect to the
certificate holder-s operation - 
(i) Aviation safety standards and safe
operating practices;
(ii) 14 CFR Chapter I (Federal Aviation Regulations);
(iii) The certificate holder-s operations specifications;
(iv) All appropriate maintenance and
airworthiness requirements of this
chapter (e.g., parts 1, 21, 23, 25, 43, 45,
47, 65, 91, and 121 of this chapter); and
(v) The manual required by Section 121.133
of this chapter; and
(3) Discharge their duties to meet applicable legal requirements and to
maintain safe operations.
(e) Each certificate holder must:

(c) Within 30 days after a certificate
holder terminates operations under
part 135 of this chapter, the operating
certificate and operations specifications must be surrendered by the certificate holder to the responsible
Flight Standards office.
[Docket No. 28154, 60 FR 65913, Dec. 20, 1995,
as amended by Docket FAA-2018-0119, Amdt.
119-19, 83 FR 9172, Mar. 5, 2018]

Section 119.63 Recency of operation.
(a) Except as provided in paragraph
(b) of this section, no certificate holder
may conduct a kind of operation for
which it holds authority in its operations specifications unless the certificate holder has conducted that kind of
operation within the preceding number
of consecutive calendar days specified
in this paragraph:
(1) For domestic, flag, or commuter
operations - 30 days.
(2) For supplemental or on-demand
operations - 90 days, except that if the
certificate holder has authority to conduct domestic, flag, or commuter operations, and has conducted domestic,
flag or commuter operations within the
previous 30 days, this paragraph does
not apply.
(b) If a certificate holder does not
conduct a kind of operation for which
it is authorized in its operations specifications within the number of calendar days specified in paragraph (a) of
this section, it shall not conduct such
kind of operation unless - 
(1) It advises the Administrator at
least 5 consecutive calendar days before resumption of that kind of operation; and
(2) It makes itself available and accessible during the 5 consecutive calendar day period in the event that the
FAA decides to conduct a full inspection
reexamination
to
determine
whether the certificate holder remains
properly and adequately equipped and
able to conduct a safe operation.
[Doc. No. 28154, 60 FR 65913, Dec. 20, 1995, as
amended by Amdt. 119-2, 61 FR 30434, June
14, 1996]

Section 119.65 Management personnel required for operations conducted
under part 121 of this chapter.
(a) Each certificate holder must have
sufficient qualified management and

30

VerDate Sep<11>2014

08:20 May 17, 2019

Jkt 247048

PO 00000

Frm 00040

Fmt 8010

Sfmt 8010

Y:\SGML\247048.XXX

247048