page-9

14 CFR Ch. I (1–1–19 Edition)

§ 119.43

(2) The certificate holder must peti-

tion for reconsideration to the Execu-
tive Director, Flight Standards Serv-
ice.

[Docket No. 28154, 60 FR 65913, Dec. 20, 1995,
as amended by Docket FAA–2018–0119, Amdt.
119–19, 83 FR 9172, Mar. 5, 2018]

§ 119.43

Certificate holder’s duty to

maintain operations specifications.

(a) Each certificate holder shall

maintain a complete and separate set
of its operations specifications at its
principal base of operations.

(b) Each certificate holder shall in-

sert pertinent excerpts of its oper-
ations specifications, or references
thereto, in its manual and shall—

(1) Clearly identify each such excerpt

as a part of its operations specifica-
tions; and

(2) State that compliance with each

operations specifications requirement
is mandatory.

each of its employees and other persons
used in its operations informed of the
provisions of its operations specifica-
tions that apply to that employee’s or
person’s duties and responsibilities.

§ 119.45

[Reserved]

§ 119.47

Maintaining a principal base

of operations, main operations base,
and main maintenance base; change
of address.

(a) Each certificate holder must

maintain a principal base of oper-
ations. Each certificate holder may
also establish a main operations base
and a main maintenance base which
may be located at either the same loca-
tion as the principal base of operations
or at separate locations.

(b) At least 30 days before it proposes

to establish or change the location of
its principal base of operations, its
main operations base, or its main
maintenance base, a certificate holder
must provide written notification to
its responsible Flight Standards office.

[Docket No. 28154, 60 FR 65913, Dec. 20, 1995,
as amended by Docket FAA–2018–0119, Amdt.
119–19, 83 FR 9172, Mar. 5, 2018]

§ 119.49

Contents of operations speci-

fications.

(a) Each certificate holder con-

ducting domestic, flag, or commuter
operations must obtain operations
specifications containing all of the fol-
lowing:

(1) The specific location of the cer-

tificate holder’s principal base of oper-
ations and, if different, the address
that shall serve as the primary point of
contact for correspondence between the
FAA and the certificate holder and the
name and mailing address of the cer-
tificate holder’s agent for service.

(2) Other business names under which

the certificate holder may operate.

(3) Reference to the economic author-

ity issued by the Department of Trans-
portation, if required.

(4) Type of aircraft, registration

markings, and serial numbers of each
aircraft authorized for use, each reg-
ular and alternate airport to be used in
scheduled operations, and, except for
commuter operations, each provisional
and refueling airport.

(i) Subject to the approval of the Ad-

ministrator with regard to form and
content, the certificate holder may in-
corporate by reference the items listed
in paragraph (a)(4) of this section into
the certificate holder’s operations
specifications by maintaining a cur-
rent listing of those items and by refer-
ring to the specific list in the applica-
ble paragraph of the operations speci-
fications.

(ii) The certificate holder may not

conduct any operation using any air-
craft or airport not listed.

(5) Kinds of operations authorized.
(6) Authorization and limitations for

routes and areas of operations.

(7) Airport limitations.
(8) Time limitations, or standards for

determining time limitations, for over-
hauling, inspecting, and checking air-
frames, engines, propellers, rotors, ap-
pliances, and emergency equipment.

(9) Authorization for the method of

controlling weight and balance of air-
craft.

(10) Interline equipment interchange

requirements, if relevant.

(11) Aircraft wet lease information

required by § 119.53(c).

VerDate Sep<11>2014

08:20 May 17, 2019

Jkt 247048

PO 00000

Frm 00034

Fmt 8010

Sfmt 8010

Y:\SGML\247048.XXX

247048