Section 119.43

14 CFR Ch. I (1-1-19 Edition)

(2) The certificate holder must petition for reconsideration to the Executive Director, Flight Standards Service.

Section 119.49 Contents of operations specifications.
(a) Each certificate holder conducting domestic, flag, or commuter
operations must obtain operations
specifications containing all of the following:
(1) The specific location of the certificate holder-s principal base of operations and, if different, the address
that shall serve as the primary point of
contact for correspondence between the
FAA and the certificate holder and the
name and mailing address of the certificate holder-s agent for service.
(2) Other business names under which
the certificate holder may operate.
(3) Reference to the economic authority issued by the Department of Transportation, if required.
(4) Type of aircraft, registration
markings, and serial numbers of each
aircraft authorized for use, each regular and alternate airport to be used in
scheduled operations, and, except for
commuter operations, each provisional
and refueling airport.
(i) Subject to the approval of the Administrator with regard to form and
content, the certificate holder may incorporate by reference the items listed
in paragraph (a)(4) of this section into
the certificate holder-s operations
specifications by maintaining a current listing of those items and by referring to the specific list in the applicable paragraph of the operations specifications.
(ii) The certificate holder may not
conduct any operation using any aircraft or airport not listed.
(5) Kinds of operations authorized.
(6) Authorization and limitations for
routes and areas of operations.
(7) Airport limitations.
(8) Time limitations, or standards for
determining time limitations, for overhauling, inspecting, and checking airframes, engines, propellers, rotors, appliances, and emergency equipment.
(9) Authorization for the method of
controlling weight and balance of aircraft.
(10) Interline equipment interchange
requirements, if relevant.
(11) Aircraft wet lease information
required by Section 119.53(c).

[Docket No. 28154, 60 FR 65913, Dec. 20, 1995,
as amended by Docket FAA-2018-0119, Amdt.
119-19, 83 FR 9172, Mar. 5, 2018]

Section 119.43 Certificate holder-s duty to
maintain operations specifications.
(a) Each certificate holder shall
maintain a complete and separate set
of its operations specifications at its
principal base of operations.
(b) Each certificate holder shall insert pertinent excerpts of its operations specifications, or references
thereto, in its manual and shall - 
(1) Clearly identify each such excerpt
as a part of its operations specifications; and
(2) State that compliance with each
operations specifications requirement
is mandatory.
(c) Each certificate holder shall keep
each of its employees and other persons
used in its operations informed of the
provisions of its operations specifications that apply to that employee-s or
person-s duties and responsibilities.
Section 119.45

[Reserved]

Section 119.47 Maintaining a principal base
of operations, main operations base,
and main maintenance base; change
of address.
(a) Each certificate holder must
maintain a principal base of operations. Each certificate holder may
also establish a main operations base
and a main maintenance base which
may be located at either the same location as the principal base of operations
or at separate locations.
(b) At least 30 days before it proposes
to establish or change the location of
its principal base of operations, its
main operations base, or its main
maintenance base, a certificate holder
must provide written notification to
its responsible Flight Standards office.
[Docket No. 28154, 60 FR 65913, Dec. 20, 1995,
as amended by Docket FAA-2018-0119, Amdt.
119-19, 83 FR 9172, Mar. 5, 2018]

24

VerDate Sep<11>2014

08:20 May 17, 2019

Jkt 247048

PO 00000

Frm 00034

Fmt 8010

Sfmt 8010

Y:\SGML\247048.XXX

247048