SectionSection 121.370-121.370a

14 CFR Ch. I (1-1-19 Edition)

with the certificate holder-s maintenance program and maintenance manual.
(c) The certificate holder must set
forth in its manual a suitable system
(which may include a coded system)
that provides for preservation and retrieval of information in a manner acceptable to the Administrator and that
provides - 
(1) A description (or reference to data
acceptable to the Administrator) of the
work performed;
(2) The name of the person performing the work if the work is performed by a person outside the organization of the certificate holder; and
(3) The name or other positive identification of the individual approving the
work.
[Doc. No. 6258, 29 FR 19210, Dec. 31, 1964, as
amended by Amdt. 121-94, 37 FR 15983, Aug. 9,
1972; Amdt. 121-106, 38 FR 22378, Aug. 20, 1973;
Docket FAA-2011-1136, Amdt. 121-371, 80 FR
11546, Mar. 4, 2015]

SectionSection 121.370-121.370a
Section 121.371 Required
sonnel.

[Reserved]
inspection

per-

(a) No person may use any person to
perform required inspections unless the
person performing the inspection is appropriately
certificated,
properly
trained, qualified, and authorized to do
so.
(b) No person may allow any person
to perform a required inspection unless, at that time, the person performing that inspection is under the
supervision and control of an inspection unit.
(c) No person may perform a required
inspection if he performed the item of
work required to be inspected.
(d) Each certificate holder shall
maintain, or shall determine that each
person with whom it arranges to perform its required inspections maintains, a current listing of persons who
have been trained, qualified, and authorized to conduct required inspections. The persons must be identified
by name, occupational title, and the
inspections that they are authorized to
perform. The certificate holder (or person with whom it arranges to perform
its required inspections) shall give
written information to each person so

authorized describing the extent of his
responsibilities,
authorities,
and
inspectional limitations. The list shall
be made available for inspection by the
Administrator upon request.
Section 121.373 Continuing analysis and surveillance.
(a) Each certificate holder shall establish and maintain a system for the
continuing analysis and surveillance of
the performance and effectiveness of
its inspection program and the program covering other maintenance, preventive maintenance, and alterations
and for the correction of any deficiency
in those programs, regardless of whether those programs are carried out by
the certificate holder or by another
person.
(b) Whenever the Administrator finds
that either or both of the programs described in paragraph (a) of this section
does not contain adequate procedures
and standards to meet the requirements of this part, the certificate holder shall, after notification by the Administrator, make any changes in
those programs that are necessary to
meet those requirements.
(c) A certificate holder may petition
the Administrator to reconsider the
notice to make a change in a program.
The petition must be filed with the responsible Flight Standards office
charged with the overall inspection of
the certificate holder-s operations
within 30 days after the certificate
holder receives the notice. Except in
the case of an emergency requiring immediate action in the interest of safety, the filing of the petition stays the
notice pending a decision by the Administrator.
[Doc. No. 6258, 29 FR 19210, Dec. 31, 1964, as
amended by Amdt. 121-207, 54 FR 39293, Sept.
25, 1989; Amdt. 121-253, 61 FR 2611, Jan. 26,
1996; Docket FAA-2018-0119, Amdt. 121-380, 83
FR 9173, Mar. 5, 2018]

Section 121.374 Continuous
airworthiness
maintenance program (CAMP) for
two-engine ETOPS.
In order to conduct an ETOPS flight
using a two-engine airplane, each certificate holder must develop and comply with the ETOPS continuous airworthiness maintenance program, as
authorized in the certificate holder-s

146

VerDate Sep<11>2014

08:20 May 17, 2019

Jkt 247048

PO 00000

Frm 00156

Fmt 8010

Sfmt 8010

Y:\SGML\247048.XXX

247048