Federal Aviation Administration, DOT Section 142.55 simulator that replicated the same type aircraft for which that instructor is designated to instruct. (c) An instructor who satisfactorily completes a curriculum required by paragraph (a) or (b) of this section in the calendar month before or after the month in which it is due is considered to have taken it in the month in which it was due for the purpose of computing when the next training is due. (d) The Administrator may give credit for the requirements of paragraph (a) or (b) of this section to an instructor who has satisfactorily completed an instructor training course for a part 121 or part 135 certificate holder if the Administrator finds such a course equivalent to the requirements of paragraph (a) or (b) of this section. [Doc. No. 26933, 61 FR 34562, July 2, 1996, as amended by Amdt. 142-1, 62 FR 13791, Mar. 21, 1997] Section 142.54 Airline transport pilot certification training program. No certificate holder may use a person nor may any person serve as an instructor in a training program approved to meet the requirements of Section 61.156 of this chapter unless the instructor: (a) Holds an airline transport pilot certificate with an airplane category multiengine class rating; (b) Has at least 2 years of experience as a pilot in command in operations conducted under Section 91.1053(a)(2)(i) or Section 135.243(a)(1) of this chapter, or as a pilot in command or second in command in any operation conducted under part 121 of this chapter; (c) Except for the holder of a flight instructor certificate, receives initial training on the following topics: (1) The fundamental principles of the learning process; (2) Elements of effective teaching, instruction methods, and techniques; (3) Instructor duties, privileges, responsibilities, and limitations; (4) Training policies and procedures; and (5) Evaluation. (d) If providing training in a flight simulation training device - (1) Holds an aircraft type rating for the aircraft represented by the flight simulation training device utilized in the training program and have received training and evaluation within the preceding 12 months from the certificate holder on the maneuvers that will be demonstrated in the flight simulation training device; and (2) Satisfies the requirements of Section 142.53(a)(4). (e) A certificate holder may not issue a graduation certificate to a student unless that student has completed all the curriculum requirements of the course. (f) A certificate holder must conduct evaluations to ensure that training techniques, procedures, and standards are acceptable to the Administrator. [Doc. No. FAA-2010-0100, 78 FR 42380, July 15, 2013] Section 142.55 Training center evaluator requirements. (a) Except as provided by paragraph (d) of this section, a training center must ensure that each person authorized as an evaluator - (1) Is approved by the Administrator; (2) Is in compliance with SectionSection 142.47, 142.49, and 142.53 and applicable sections of part 183 of this chapter; and (3) Prior to designation, and except as provided in paragraph (b) of this section, every 12-calendar-month period following initial designation, the certificate holder must ensure that the evaluator satisfactorily completes a curriculum that includes the following: (i) Evaluator duties, functions, and responsibilities; (ii) Methods, procedures, and techniques for conducting required tests and checks; (iii) Evaluation of pilot performance; and (iv) Management of unsatisfactory tests and subsequent corrective action; and (4) If evaluating in qualified and approved flight training equipment must satisfactorily pass a written test and annual proficiency check in a flight simulator or aircraft in which the evaluator will be evaluating. (b) An evaluator who satisfactorily completes a curriculum required by paragraph (a) of this section in the calendar month before or the calendar month after the month in which it is due is considered to have taken it in 633 VerDate Sep<11>2014 08:20 May 17, 2019 Jkt 247048 PO 00000 Frm 00643 Fmt 8010 Sfmt 8010 Y:\SGML\247048.XXX 247048