Section 142.5

14 CFR Ch. I (1-1-19 Edition)

and limitations, and specifies training
program requirements.
[Doc. No. 26933, 61 FR 34562, July 2, 1996, as
amended by Amdt. 142-2, 62 FR 68137, Dec. 30,
1997; Amdt. 142-7, 76 FR 54110, Aug. 31, 2011;
Amdt. 142-9, 78 FR 42380, July 15, 2013]

Section 142.5 Certificate and training specifications required.
(a) No person may operate a certificated training center without, or in
violation of, a training center certificate and training specifications issued
under this part.
(b) An applicant will be issued a
training center certificate and training
specifications with appropriate limitations if the applicant shows that it has
adequate facilities, equipment, personnel, and courseware required by
Section 142.11 to conduct training approved
under Section 142.37.
Section 142.7 Duration of a certificate.
(a) Except as provided in paragraph
(b) of this section, a training center
certificate issued under this part is effective until the certificate is surrendered or until the Administrator suspends, revokes, or terminates it.
(b) Unless sooner surrendered, suspended, or revoked, a certificate issued
under this part for a training center located outside the United States expires
at the end of the twelfth month after
the month in which it is issued or renewed.
(c) If the Administrator suspends, revokes, or terminates a training center
certificate, the holder of that certificate shall return the certificate to the
Administrator within 5 working days
after being notified that the certificate
is suspended, revoked, or terminated.
Section 142.9 Deviations or waivers.
(a) The Administrator may issue deviations or waivers from any of the requirements of this part.
(b) A training center applicant requesting a deviation or waiver under
this section must provide the Administrator with information acceptable to
the Administrator that shows - 
(1) Justification for the deviation or
waiver; and
(2) That the deviation or waiver will
not adversely affect the quality of instruction or evaluation.

Section 142.11 Application for issuance or
amendment.
(a) An application for a training center certificate and training specifications shall - 
(1) Be made on a form and in a manner prescribed by the Administrator;
(2) Be filed with the responsible
Flight Standards office for the area in
which the applicant-s principal business office is located; and
(3) Be made at least 120 calendar days
before the beginning of any proposed
training or 60 calendar days before effecting an amendment to any approved
training, unless a shorter filing period
is approved by the Administrator.
(b) Each application for a training
center certificate and training specification shall provide - 
(1) A statement showing that the
minimum qualification requirements
for each management position are met
or exceeded;
(2) A statement acknowledging that
the applicant shall notify the Administrator within 10 working days of any
change made in the assignment of persons in the required management positions;
(3) The proposed training authorizations and training specifications requested by the applicant;
(4) The proposed evaluation authorization;
(5) A description of the flight training equipment that the applicant proposes to use;
(6) A description of the applicant-s
training facilities, equipment, qualifications of personnel to be used, and
proposed evaluation plans;
(7) A training program curriculum,
including syllabi, outlines, courseware,
procedures, and documentation to support the items required in subpart B of
this part, upon request by the Administrator;
(8) A description of a recordkeeping
system that will identify and document
the details of training, qualification,
and certification of students, instructors, and evaluators;
(9) A description of quality control
measures proposed; and
(10) A method of demonstrating the
applicant-s qualification and ability to
provide training for a certificate or
rating in fewer than the minimum

626

VerDate Sep<11>2014

08:20 May 17, 2019

Jkt 247048

PO 00000

Frm 00636

Fmt 8010

Sfmt 8010

Y:\SGML\247048.XXX

247048