Federal Aviation Administration, DOT

Section 142.13

hours prescribed in part 61 of this chapter if the applicant proposes to do so.
(c) The facilities and equipment described in paragraph (b)(6) of this section shall - 
(1) Be available for inspection and
evaluation prior to approval; and
(2) Be in place and operational at the
location of the proposed training center prior to issuance of a certificate
under this part.
(d) An applicant who meets the requirements of this part and is approved
by the Administrator is entitled to - 
(1) A training center certificate containing all business names included on
the application under which the certificate holder may conduct operations
and the address of each business office
used by the certificate holder; and
(2) Training specifications, issued by
the Administrator to the certificate
holder, containing - 
(i) The type of training authorized,
including approved courses;
(ii) The category, class, and type of
aircraft that may be used for training,
testing, and checking;
(iii) For each flight simulator or
flight training device, the make,
model, and series of airplane or the set
of airplanes being simulated and the
qualification level assigned, or the
make, model, and series of rotorcraft,
or set of rotorcraft being simulated and
the qualification level assigned;
(iv) For each flight simulator and
flight training device subject to qualification evaluation by the Administrator, the identification number assigned by the FAA;
(v) The name and address of all satellite training centers, and the approved courses offered at each satellite
training center;
(vi) Authorized deviations or waivers
from this part; and
(vii) Any other items the Administrator may require or allow.
(e) The Administrator may deny, suspend, revoke, or terminate a certificate
under this part if the Administrator
finds that the applicant or the certificate holder - 
(1) Held a training center certificate
that was revoked, suspended, or terminated within the previous 5 years; or
(2) Employs or proposes to employ a
person who - 

(i) Was previously employed in a
management or supervisory position by
the holder of a training center certificate that was revoked, suspended, or
terminated within the previous 5 years;
(ii) Exercised control over any certificate holder whose certificate has
been revoked, suspended, or terminated
within the last 5 years; and
(iii) Contributed materially to the
revocation, suspension, or termination
of that certificate and who will be employed in a management or supervisory
position, or who will be in control of or
have a substantial ownership interest
in the training center.
(3) Has provided incomplete, inaccurate, fraudulent, or false information
for a training center certificate;
(4) Should not be granted a certificate if the grant would not foster aviation safety.
(f) At any time, the Administrator
may amend a training center certificate - 
(1) On the Administrator-s own initiative, under section 609 of the Federal
Aviation Act of 1958 (49 U.S.C. 1429), as
amended, and part 13 of this chapter; or
(2) Upon timely application by the
certificate holder.
(g) The certificate holder must file
an application to amend a training center certificate at least 60 calendar days
prior to the applicant-s proposed effective amendment date unless a different
filing period is approved by the Administrator.
[Doc. No. 26933, 61 FR 34562, July 2, 1996, as
amended by Amdt. 142-1, 62 FR 13791, Mar. 21,
1997; Docket FAA-2018-0119, Amdt. 142-10, 83
FR 9176, Mar. 5, 2018]

Section 142.13 Management and personnel
requirements.
An applicant for a training center
certificate must show that - 
(a) For each proposed curriculum, the
training center has, and shall maintain, a sufficient number of instructors
who are qualified in accordance with
subpart C of this part to perform the
duties to which they are assigned;
(b) The training center has designated, and shall maintain, a sufficient number of approved evaluators to
provide required checks and tests to
graduation candidates within 7 calendar days of training completion for

627

VerDate Sep<11>2014

08:20 May 17, 2019

Jkt 247048

PO 00000

Frm 00637

Fmt 8010

Sfmt 8010

Y:\SGML\247048.XXX

247048