Federal Aviation Administration, DOT Section 147.31 school must provide training aids, or operational mock-ups of them. [Doc. No. 1157, 27 FR 6669, July 19, 1962, as amended by Amdt. 147-5, 57 FR 28959, June 29, 1992] Section 147.19 Materials, special tools, and shop equipment requirements. An applicant for an aviation maintenance technician school certificate and rating, or for an additional rating, must have an adequate supply of material, special tools, and such of the shop equipment as are appropriate to the approved curriculum of the school and are used in constructing and maintaining aircraft, to assure that each student will be properly instructed. The special tools and shop equipment must be in satisfactory working condition for the purpose for which they are to be used. [Amdt. 147-5, 57 FR 28959, June 29, 1992] Section 147.21 General curriculum requirements. (a) An applicant for an aviation maintenance technician school certificate and rating, or for an additional rating, must have an approved curriculum that is designed to qualify his students to perform the duties of a mechanic for a particular rating or ratings. (b) The curriculum must offer at least the following number of hours of instruction for the rating shown, and the instruction unit hour shall not be less than 50 minutes in length - (1) Airframe - 1,150 hours (400 general plus 750 airframe). (2) Powerplant - 1,150 hours (400 general plus 750 powerplant). (3) Combined airframe and powerplant - 1,900 hours (400 general plus 750 airframe and 750 powerplant). (c) The curriculum must cover the subjects and items prescribed in appendixes B, C, or D, as applicable. Each item must be taught to at least the indicated level of proficiency, as defined in appendix A. (d) The curriculum must show - (1) The required practical projects to be completed; (2) For each subject, the proportions of theory and other instruction to be given; and (3) A list of the minimum required school tests to be given. (e) Notwithstanding the provisions of paragraphs (a) through (d) of this section and Section 147.11, the holder of a certificate issued under subpart B of this part may apply for and receive approval of special courses in the performance of special inspection and preventive maintenance programs for a primary category aircraft type certificated under Section 21.24(b) of this chapter. The school may also issue certificates of competency to persons successfully completing such courses provided that all other requirements of this part are met and the certificate of competency specifies the aircraft make and model to which the certificate applies. [Doc. No. 1157, 27 FR 6669, July 13, 1962, as amended by Amdt. 147-1, 32 FR 5770 Apr. 11, 1967; Amdt. 147-5, 57 FR 28959, June 29, 1992; Amdt. 147-6, 57 FR 41370, Sept. 9, 1992] Section 147.23 Instructor requirements. An applicant for an aviation maintenance technician school certificate and rating, or for an additional rating, must provide the number of instructors holding appropriate mechanic certificates and ratings that the Administrator determines necessary to provide adequate instruction and supervision of the students, including at least one such instructor for each 25 students in each shop class. However, the applicant may provide specialized instructors, who are not certificated mechanics, to teach mathematics, physics, basic electricity, basic hydraulics, drawing, and similar subjects. The applicant is required to maintain a list of the names and qualifications of specialized instructors, and upon request, provide a copy of the list to the FAA. [Amdt. 147-5, 57 FR 28959, June 29, 1992] Subpart C - Operating Rules Section 147.31 Attendance and enrollment, tests, and credit for prior instruction or experience. (a) A certificated aviation maintenance technician school may not require any student to attend classes of instruction more than 8 hours in any day or more than 6 days or 40 hours in any 7-day period. 653 VerDate Sep<11>2014 08:20 May 17, 2019 Jkt 247048 PO 00000 Frm 00663 Fmt 8010 Sfmt 8010 Y:\SGML\247048.XXX 247048