357
Pipeline and Haz. Matls. Safety Admin., DOT
§ 172.102
a. The proper shipping name ‘‘Paint re-
lated material’’ may be used for consign-
ments of packages containing ‘‘Paint’’
and ‘‘Paint related material’’ in the same
package;
b. The proper shipping name ‘‘Paint re-
lated material, corrosive, flammable’’
may be used for consignments of pack-
ages containing ‘‘Paint, corrosive, flam-
mable’’ and ‘‘Paint related material, cor-
rosive, flammable’’ in the same package;
c. The proper shipping name ‘‘Paint related
material, flammable, corrosive’’ may be
used for consignments of packages con-
taining ‘‘Paint, flammable, corrosive’’
and ‘‘Paint related material, flammable,
corrosive’’ in the same package; and
d. The proper shipping name ‘‘Printing ink
related material’’ may be used for con-
signments of packages containing
‘‘Printing ink’’ and ‘‘Printing ink related
material’’ in the same package.
368
In the case of non-fissile or fissile-ex-
cepted uranium hexafluoride, the material
must be classified under UN3507 or UN2978.
369
In accordance with § 173.2a of this sub-
chapter, this radioactive material in an ex-
cepted package possessing corrosive prop-
erties is classified in Division 6.1 with a ra-
dioactive material and corrosive sub-
sidiary risk. Uranium hexafluoride may be
classified under this entry only if the con-
ditions of §§ 173.420(a)(4) and (6) and (d) and
173.421(b) and (d) of this subchapter, and,
for fissile-excepted material, the condi-
tions of § 173.453 of this subchapter are met.
In addition to the provisions applicable to
the transport of Division 6.1 substances,
the provisions of §§ 173.421(c) and 173.443(a)
of this subchapter apply. In addition, pack-
ages shall be legibly and durably marked
with an identification of the consignor, the
consignee, or both. No Class 7 label is re-
quired to be displayed. The consignor shall
be in possession of a copy of each applica-
ble certificate when packages include
fissile material excepted by competent au-
thority approval. When a consignment is
undeliverable, the consignment shall be
placed in a safe location and the appro-
priate competent authority shall be in-
formed as soon as possible and a request
made for instructions on further action. If
it is evident that a package of radioactive
material, or conveyance carrying
unpackaged radioactive material, is leak-
ing, or if it is suspected that the package,
or conveyance carrying unpackaged mate-
rial, may have leaked, the requirements of
§ 173.443(e) of this subchapter apply.
370
This entry also applies to Ammonium
nitrate with not more than 0.2% combus-
tible substances, including any organic
substance calculated as carbon, to the ex-
clusion of any added substance, that gives
a positive result when tested in accordance
with Test Series 2 of the UN Manual of
Tests and Criteria, Part I (incorporated by
reference; see § 171.7 of this subchapter).
See also UN No. 1942.
371
a. This entry also applies to articles not
conforming to the requirements of
§§ 173.302, 173.304, or 173.306 of this sub-
chapter, containing a small pressure recep-
tacle with a release device. Such articles
must comply with the following require-
ments:
(1) The water capacity of the pressure re-
ceptacle must not exceed 0.5 L and the
working pressure must not exceed 25 bar
at 15
°
C (59
°
F);
(2) The minimum burst pressure of the
pressure receptacle must be at least four
times the pressure of the gas at 15
°
C (59
°
F);
(3) Each article must be manufactured in
such a way that unintentional firing or
release is avoided under normal condi-
tions of handling, packing, transport and
use. This may be fulfilled by an addi-
tional locking device linked to the acti-
vator;
(4) Each article must be manufactured in
such a way as to prevent hazardous pro-
jections of the pressure receptacle or
parts of the pressure receptacle;
(5) Each pressure receptacle must be manu-
factured from material which will not
fragment upon rupture;
(6) The design type of the article must be
subjected to a fire test. For this test, the
provisions of paragraphs 16.6.1.2 except
letter g, 16.6.1.3.1 to 16.6.1.3.6, 16.6.1.3.7(b)
and 16.6.1.3.8 of the UN Manual of Tests
and Criteria must be applied. It must be
demonstrated that the article relieves its
pressure by means of a fire degradable
seal or other pressure relief device, in
such a way that the pressure receptacle
will not fragment and that the article or
fragments of the article do not rocket
more than 10 meters; and
(7) The design type of the article must be
subjected to the following test. A stimu-
lating mechanism must be used to ini-
tiate one article in the middle of the
packaging. There must be no hazardous
effects outside the package such as dis-
ruption of the package, metal fragments
or a receptacle which passes through the
packaging.
b. The manufacturer must produce tech-
nical documentation of the design type,
manufacture as well as the tests and
their results. The manufacturer must
apply procedures to ensure that articles
produced in series are made of good qual-
ity, conform to the design type and are
able to meet the requirements in (a). The
manufacturer must provide such infor-
mation to a representative of the Depart-
ment upon request.
372
This entry applies to asymmetric ca-
pacitors with an energy storage capacity
VerDate Sep<11>2014
16:41 Oct 31, 2018
Jkt 244226
PO 00000
Frm 00367
Fmt 8010
Sfmt 8010
Q:\49\49V2.TXT
PC31