Pipeline and Haz. Matls. Safety Admin., DOT a. The proper shipping name - Paint related material - may be used for consignments of packages containing - Paint - and - Paint related material - in the same package; b. The proper shipping name - Paint related material, corrosive, flammable - may be used for consignments of packages containing - Paint, corrosive, flammable - and - Paint related material, corrosive, flammable - in the same package; c. The proper shipping name - Paint related material, flammable, corrosive - may be used for consignments of packages containing - Paint, flammable, corrosive - and - Paint related material, flammable, corrosive - in the same package; and d. The proper shipping name - Printing ink related material - may be used for consignments of packages containing - Printing ink - and - Printing ink related material - in the same package. 368 In the case of non-fissile or fissile-excepted uranium hexafluoride, the material must be classified under UN3507 or UN2978. 369 In accordance with Section 173.2a of this subchapter, this radioactive material in an excepted package possessing corrosive properties is classified in Division 6.1 with a radioactive material and corrosive subsidiary risk. Uranium hexafluoride may be classified under this entry only if the conditions of SectionSection 173.420(a)(4) and (6) and (d) and 173.421(b) and (d) of this subchapter, and, for fissile-excepted material, the conditions of Section 173.453 of this subchapter are met. In addition to the provisions applicable to the transport of Division 6.1 substances, the provisions of SectionSection 173.421(c) and 173.443(a) of this subchapter apply. In addition, packages shall be legibly and durably marked with an identification of the consignor, the consignee, or both. No Class 7 label is required to be displayed. The consignor shall be in possession of a copy of each applicable certificate when packages include fissile material excepted by competent authority approval. When a consignment is undeliverable, the consignment shall be placed in a safe location and the appropriate competent authority shall be informed as soon as possible and a request made for instructions on further action. If it is evident that a package of radioactive material, or conveyance carrying unpackaged radioactive material, is leaking, or if it is suspected that the package, or conveyance carrying unpackaged material, may have leaked, the requirements of Section 173.443(e) of this subchapter apply. 370 This entry also applies to Ammonium nitrate with not more than 0.2% combustible substances, including any organic substance calculated as carbon, to the exclusion of any added substance, that gives a positive result when tested in accordance with Test Series 2 of the UN Manual of Section 172.102 Tests and Criteria, Part I (incorporated by reference; see Section 171.7 of this subchapter). See also UN No. 1942. 371 a. This entry also applies to articles not conforming to the requirements of SectionSection 173.302, 173.304, or 173.306 of this subchapter, containing a small pressure receptacle with a release device. Such articles must comply with the following requirements: (1) The water capacity of the pressure receptacle must not exceed 0.5 L and the working pressure must not exceed 25 bar at 15 SectionC (59 SectionF); (2) The minimum burst pressure of the pressure receptacle must be at least four times the pressure of the gas at 15 SectionC (59 SectionF); (3) Each article must be manufactured in such a way that unintentional firing or release is avoided under normal conditions of handling, packing, transport and use. This may be fulfilled by an additional locking device linked to the activator; (4) Each article must be manufactured in such a way as to prevent hazardous projections of the pressure receptacle or parts of the pressure receptacle; (5) Each pressure receptacle must be manufactured from material which will not fragment upon rupture; (6) The design type of the article must be subjected to a fire test. For this test, the provisions of paragraphs 16.6.1.2 except letter g, 16.6.1.3.1 to 16.6.1.3.6, 16.6.1.3.7(b) and 16.6.1.3.8 of the UN Manual of Tests and Criteria must be applied. It must be demonstrated that the article relieves its pressure by means of a fire degradable seal or other pressure relief device, in such a way that the pressure receptacle will not fragment and that the article or fragments of the article do not rocket more than 10 meters; and (7) The design type of the article must be subjected to the following test. A stimulating mechanism must be used to initiate one article in the middle of the packaging. There must be no hazardous effects outside the package such as disruption of the package, metal fragments or a receptacle which passes through the packaging. b. The manufacturer must produce technical documentation of the design type, manufacture as well as the tests and their results. The manufacturer must apply procedures to ensure that articles produced in series are made of good quality, conform to the design type and are able to meet the requirements in (a). The manufacturer must provide such information to a representative of the Department upon request. 372 This entry applies to asymmetric capacitors with an energy storage capacity 357 VerDate Sep<11>2014 16:41 Oct 31, 2018 Jkt 244226 PO 00000 Frm 00367 Fmt 8010 Sfmt 8010 Q:\49\49V2.TXT PC31