page-222

368

49 CFR Ch. I (10–1–18 Edition)

§ 172.102

if the hazardous material is free from
hydrofluoric acid.

For combination or composite pack-

agings, glass inner packagings, other than
ampoules, are not permitted.

Glass materials of construction are not

authorized for any part of a packaging
which is normally in contact with the haz-
ardous material.

Battery fluid packaged with electric

storage batteries, wet or dry, must con-
form to the packaging provisions of
§ 173.159 (g) or (h) of this subchapter.

The hazard class or division number of

the material must be marked on the pack-
age in accordance with § 172.302 of this sub-
chapter. However, the hazard label cor-
responding to the hazard class or division
may be substituted for the marking.

Nitroglycerin solution in alcohol may be

transported under this entry only when the
solution is packed in metal cans of not
more than 1 L capacity each, overpacked
in a wooden box containing not more than
5 L. Metal cans must be completely sur-
rounded with absorbent cushioning mate-
rial. Wooden boxes must be completely
lined with a suitable material impervious
to water and nitroglycerin.

N11

This material is excepted for the speci-

fication packaging requirements of this
subchapter if the material is packaged in
strong, tight non-bulk packaging meeting
the requirements of subparts A and B of
part 173 of this subchapter.

N12

Plastic packagings are not authorized.

N20

A 5M1 multi-wall paper bag is author-

ized if transported in a closed transport ve-
hicle.

N25

Steel single packagings are not author-

ized.

N32

Aluminum materials of construction

are not authorized for single packagings.

N33

Aluminum drums are not authorized.

N34

Aluminum construction materials are

not authorized for any part of a packaging
which is normally in contact with the haz-
ardous material.

N36

Aluminum or aluminum alloy construc-

tion materials are permitted only for halo-
genated hydrocarbons that will not react
with aluminum.

N37

This material may be shipped in an in-

tegrally-lined fiber drum (1G) which meets
the general packaging requirements of sub-
part B of part 173 of this subchapter, the
requirements of part 178 of this subchapter
at the packing group assigned for the ma-
terial and to any other special provisions
of column 7 of the § 172.101 table.

N40

This material is not authorized in the

following packagings:
a. A combination packaging consisting of a

4G fiberboard box with inner receptacles
of glass or earthenware;

b. A single packaging of a 4C2 sift-proof,

natural wood box; or

c. A composite packaging 6PG2 (glass, por-

celain or stoneware receptacles within a
fiberboard box).

N41

Metal construction materials are not

authorized for any part of a packaging
which is normally in contact with the haz-
ardous material.

N42

1A1 drums made of carbon steel with

thickness of body and heads of not less
than 1.3 mm (0.050 inch) and with a corro-
sion-resistant phenolic lining are author-
ized for stabilized benzyl chloride if tested
and certified to the Packing Group I per-
formance level at a specific gravity of not
less than 1.8.

N43

Metal drums are permitted as single

packagings only if constructed of nickel or
monel.

N45

Copper cartridges are authorized as

inner packagings if the hazardous material
is not in dispersion.

N65

Outage must be sufficient to prevent

cylinders or spheres from becoming liquid
full at 55

C (130

F). The vacant space (out-

age) may be charged with a nonflammable
nonliquefied compressed gas if the pressure
in the cylinder or sphere at 55

C (130

does not exceed 125 percent of the marked
service pressure.

N73

Packagings consisting of outer wooden

or fiberboard boxes with inner glass, metal
or other strong containers; metal or fiber
drums; kegs or barrels; or strong metal
cans are authorized and need not conform
to the requirements of part 178 of this sub-
chapter.

N74

Packages consisting of tightly closed

inner containers of glass, earthenware,
metal or polyethylene, capacity not over
0.5 kg (1.1 pounds) securely cushioned and
packed in outer wooden barrels or wooden
or fiberboard boxes, not over 15 kg (33
pounds) net weight, are authorized and
need not conform to the requirements of
part 178 of this subchapter.

N75

Packages consisting of tightly closed

inner packagings of glass, earthenware or
metal, securely cushioned and packed in
outer wooden barrels or wooden or fiber-
board boxes, capacity not over 2.5 kg (5.5
pounds) net weight, are authorized and
need not conform to the requirements of
part 178 of this subchapter.

N76

For materials of not more than 25 per-

cent active ingredient by weight, packages
consisting of inner metal packagings not
greater than 250 mL (8 ounces) capacity
each, packed in strong outer packagings
together with sufficient absorbent mate-
rial to completely absorb the liquid con-
tents are authorized and need not conform
to the requirements of part 178 of this sub-
chapter.

VerDate Sep<11>2014

16:41 Oct 31, 2018

Jkt 244226

PO 00000

Frm 00378

Fmt 8010

Sfmt 8010

Q:\49\49V2.TXT

PC31