Pipeline and Haz. Matls. Safety Admin., DOT
2nd Floor, 1200 New Jersey Avenue SE.,
Washington, DC 20590-0001.
(5) The following color standards in
the PANTONE  formula guide coated/
uncoated (see Section 171.7(b) of this subchapter) may be used to achieve the required colors on markings and hazard
warning labels and placards:
(i) For Red - Use PANTONE  186 U
(ii) For Orange - Use PANTONE  151
U
(iii) For Yellow - Use PANTONE  109
U
(iv) For Green - Use PANTONE  335
U
(v) For Blue - Use PANTONE  285 U
(vi) For Purple - Use PANTONE  259
U
(6) Where specific colors from the
PANTONE MATCHING SYSTEM  are
applied as opaque coatings, such as
paint, enamel, or plastic, or where labels are printed directly on the surface
of a packaging, a spectrophotometer or
other instrumentation must be used to
ensure a proper match with the color
standards in the PANTONE  formula
guide coated/uncoated for colors prescribed in paragraph (d)(5) of this section. PANTONE  is the property of
Pantone, Inc.
(7) The specified label color must extend to the edge of the label in the area
designated on each label, except for the
CORROSIVE,
RADIOACTIVE
YELLOW-II, and RADIOACTIVE YELLOW-
III labels on which the color must extend only to the inner border.
(e) Form identification. A label may
contain form identification information, including the name of its maker,
provided that information is printed
outside the solid line inner border in no
larger than 10-point type.
(f) Exceptions. Except for materials
poisonous by inhalation (See Section 171.8 of
this subchapter), a label conforming to
specifications in the UN Recommendations (IBR, see Section 171.7 of this subchapter) may be used in place of a corresponding label that conforms to the
requirements of this subpart.

Section 172.411

(g) Trefoil symbol. The trefoil symbol
on the RADIOACTIVE WHITE-I, RADIOACTIVE YELLOW-II, and RADIOACTIVE YELLOW-III labels must meet
the appropriate specifications in appendix B of this part.
[Amdt. 172-123, 55 FR 52595, Dec. 21, 1990, as
amended at 56 FR 66256, Dec. 20, 1991; Amdt.
172-143, 60 FR 50305, Sept. 28, 1995; 64 FR
10776, Mar. 5, 1999; 66 FR 8647, Feb. 1, 2001; 66
FR 44255, Aug. 22, 2001; 67 FR 61013, Sept. 27,
2002; 69 FR 64472, Nov. 4, 2004; 71 FR 78627,
Dec. 29, 2006; 75 FR 72, Jan. 4, 2010; 78 FR 1073,
Jan. 7, 2013; 80 FR 1150, Jan. 8, 2015; 81 FR
35540, June 2, 2016; 82 FR 15873, Mar. 30, 2017]

Section 172.411 EXPLOSIVE 1.1, 1.2, 1.3, 1.4,
1.5 and 1.6 labels, and EXPLOSIVE
Subsidiary label.
(a) Except for size and color, the EXPLOSIVE 1.1, EXPLOSIVE 1.2 and EXPLOSIVE 1.3 labels must be as follows:

(b) In addition to complying with
Section 172.407, the background color on the
EXPLOSIVE 1.1, EXPLOSIVE 1.2 and
EXPLOSIVE 1.3 labels must be orange.
The  - ** -  must be replaced with the appropriate division number and compatibility group letter. The compatibility
group letter must be the same size as
the division number and must be shown
as a capitalized Roman letter.
(c) Except for size and color, the EXPLOSIVE 1.4, EXPLOSIVE 1.5 and EXPLOSIVE 1.6 labels must be as follows:

VerDate Sep<11>2014

16:41 Oct 31, 2018

Jkt 244226

PO 00000

Frm 00423

Fmt 8010

Sfmt 8010

Q:\49\49V2.TXT

PC31

EC02MR91.015</GPH>

413