Code of Federal Regulations - Title 14

200

14 CFR Ch. I (1–1–14 Edition)

Pt. 60, App. C

(3) Satisfactorily accomplish the subjec-

tive tests listed in Attachment 3 of this ap-
pendix.

b. The request described in § 60.15(a) must

include all of the following:

(1) A statement that the FFS meets all of

the applicable provisions of this part and all
applicable provisions of the QPS.

(2) A confirmation that the sponsor will

forward to the NSPM the statement de-
scribed in § 60.15(b) in such time as to be re-
ceived no later than 5 business days prior to
the scheduled evaluation and may be for-
warded to the NSPM via traditional or elec-
tronic means.

(3) A QTG, acceptable to the NSPM, that

includes all of the following:

(a) Objective data obtained from aircraft

testing or another approved source.

(b) Correlating objective test results ob-

tained from the performance of the FFS as
prescribed in the appropriate QPS.

scribed in the appropriate QPS.

(d) A description of the equipment nec-

essary to perform the evaluation for initial
qualification and the continuing qualifica-
tion evaluations.

c. The QTG described in paragraph (a)(3) of

this section, must provide the documented
proof of compliance with the simulator ob-
jective tests in Attachment 2, Table C2A of
this appendix.

d. The QTG is prepared and submitted by

the sponsor, or the sponsor’s agent on behalf
of the sponsor, to the NSPM for review and
approval, and must include, for each objec-
tive test:

(1) Parameters, tolerances, and flight con-

ditions.

(2) Pertinent and complete instructions for

the conduct of automatic and manual tests.

(3) A means of comparing the FFS test re-

sults to the objective data.

(4) Any other information as necessary, to

assist in the evaluation of the test results.

(5) Other information appropriate to the

qualification level of the FFS.

e. The QTG described in paragraphs (a)(3)

and (b) of this section, must include the fol-
lowing:

(1) A QTG cover page with sponsor and

FAA approval signature blocks (see Attach-
ment 4, Figure C4C, of this appendix, for a
sample QTG cover page).

(2) A continuing qualification evaluation

schedule requirements page. This page will
be used by the NSPM to establish and record
the frequency with which continuing quali-
fication evaluations must be conducted and
any subsequent changes that may be deter-
mined by the NSPM in accordance with
§ 60.19. See Attachment 4 of this appendix,
Figure C4G, for a sample Continuing Quali-
fication Evaluation Requirements page.

(3) An FFS information page that provides

the information listed in this paragraph (see

Attachment 4, Figure C4B, of this appendix
for a sample FFS information page). For
convertible FFSs, the sponsor must submit a
separate page for each configuration of the
FFS.

(a) The sponsor’s FFS identification num-

ber or code.

(b) The helicopter model and series being

simulated.

or reference.

(d) The source of the basic aerodynamic

model and the aerodynamic coefficient data
used to modify the basic model.

(e) The engine model(s) and its data revi-

sion number or reference.

(f) The flight control data revision number

or reference.

(g) The flight management system identi-

fication and revision level.

(h) The FFS model and manufacturer.
(i) The date of FFS manufacture.
(j) The FFS computer identification.
(k) The visual system model and manufac-

turer, including display type.

(l) The motion system type and manufac-

turer, including degrees of freedom.

(4) A Table of Contents.
(5) A log of revisions and a list of effective

pages.

(6) List of all relevant data references.
(7) A glossary of terms and symbols used

(including sign conventions and units).

(8) Statements of compliance and capa-

bility (SOCs) with certain requirements.

(9) Recording procedures or equipment re-

quired to accomplish the objective tests.

(10) The following information for each ob-

jective test designated in Attachment 2 of
this appendix, Table C2A, as applicable to
the qualification level sought:

(a) Name of the test.
(b) Objective of the test.
(c) Initial conditions.
(d) Manual test procedures.
(e) Automatic test procedures (if applica-

ble).

(f) Method for evaluating FFS objective

test results.

(g) List of all relevant parameters driven

or constrained during the automatically con-
ducted test(s).

(h) List of all relevant parameters driven

or constrained during the manually con-
ducted test(s).

(i) Tolerances for relevant parameters.
(j) Source of Validation Data (document

and page number).

(k) Copy of the Validation Data (if located

in a separate binder, a cross reference for the
identification and page number for pertinent
data location must be provided).

(l) Simulator Objective Test Results as ob-

tained by the sponsor. Each test result must
reflect the date completed and must be
clearly labeled as a product of the device
being tested.

VerDate Mar<15>2010

20:48 Jan 30, 2014

Jkt 232047

PO 00000

Frm 00210

Fmt 8010

Sfmt 8002

Q:\14\14V2.TXT

ofr150

PsN: PC150