115
Federal Aviation Administration, DOT
Pt. 60, App. A
T
ABLE
A3F—F
UNCTIONS AND
S
UBJECTIVE
T
ESTS
—Continued
QPS Requirements
Entry No.
Special effects
Simulator level
A B C D
Required only for those airplanes authorized for operations in known icing conditions.
Procedure: With the simulator airborne, in a clean configuration, nominal altitude and cruise
airspeed, autopilot on and auto-throttles off, engine and airfoil anti-ice/de-ice systems deacti-
vated; activate icing conditions at a rate that allows monitoring of simulator and systems re-
sponse. Icing recognition will include an increase in gross weight, airspeed decay, change in
simulator pitch attitude, change in engine performance indications (other than due to air-
speed changes), and change in data from pitot/static system. Activate heating, anti-ice, or
de-ice systems independently. Recognition will include proper effects of these systems,
eventually returning the simulated airplane to normal flight.
T
ABLE
A3G—F
UNCTIONS AND
S
UBJECTIVE
T
ESTS
QPS Requirements
Entry No.
Special effects
Simulator level
A B C D
Functions in this table are subject to evaluation only if appropriate for the airplane and/or the system is installed on the specific
simulator.
1. ...............
Simulator Power Switch(es) ...........................................................................................................
X X X X
2. ...............
Airplane conditions
2.a. ....
Gross weight, center of gravity, fuel loading and allocation ..........................................................
X X X X
2.b. ....
Airplane systems status .................................................................................................................
X X X X
2.c. .....
Ground crew functions (e.g., ext. power, push back) ....................................................................
X X X X
3. ...............
Airports
3.a. ....
Number and selection ....................................................................................................................
X X X X
3.b. ....
Runway selection ...........................................................................................................................
X X X X
3.c. .....
Runway surface condition (e.g., rough, smooth, icy, wet) ............................................................
X
X
3.d. ....
Preset positions (e.g., ramp, gate, #1 for takeoff, takeoff position, over FAF) .............................
X
X
X
X
3.e. ....
Lighting controls .............................................................................................................................
X X X X
4. ...............
Environmental controls
4.a .....
Visibility (statute miles (kilometers)) ..............................................................................................
X X X X
4.b. ....
Runway visual range (in feet (meters)) .........................................................................................
X X X X
4.c. .....
Temperature ...................................................................................................................................
X X X X
4.d. ....
Climate conditions (e.g., ice, snow, rain) .......................................................................................
X X X X
4.e. ....
Wind speed and direction ..............................................................................................................
X X X X
4.f. .....
Windshear ......................................................................................................................................
X X
4.g. ....
Clouds (base and tops) ..................................................................................................................
X X X X
5. ...............
Airplane system malfunctions (Inserting and deleting malfunctions into the simulator) ...............
X
X
X
X
6. ...............
Locks, Freezes, and Repositioning
6.a. ....
Problem (all) freeze/release ...........................................................................................................
X X X X
6.b. ....
Position (geographic) freeze/release .............................................................................................
X X X X
6.c. .....
Repositioning (locations, freezes, and releases) ...........................................................................
X X X X
VerDate Mar<15>2010
20:48 Jan 30, 2014
Jkt 232047
PO 00000
Frm 00125
Fmt 8010
Sfmt 8002
Q:\14\14V2.TXT
ofr150
PsN: PC150