372
14 CFR Ch. I (1–1–14 Edition)
Pt. 60, App. E
assigned and reviewed within a specified
time period.
(c) Routine maintenance of the FSTD and
performance of the QTG tests with adequate
staffing to cover FSTD operating periods.
(d) A planned internal assessment schedule
and a periodic review should be used to
verify that corrective action was complete
and effective. The assessor should have ade-
quate knowledge of FSTDs and should be ac-
ceptable to the NSPM.
(5) The MR should receive Quality System
training and brief other personnel on the
procedures.
E
ND
I
NFORMATION
lllllllllllllllllllllll
T
ABLE
E1—FSTD Q
UALITY
M
ANAGEMENT
S
YSTEM
Entry No.
QPS requirement
Information
(reference)
E1.1. ......................
A QMS manual that prescribes the policies, processes, or procedures outlined
in this table.
§ 60.5(a).
E1.2. ......................
A policy, process, or procedure specifying how the sponsor will identify defi-
ciencies in the QMS.
§ 60.5(b).
E1.3. ......................
A policy, process, or procedure specifying how the sponsor will document
how the QMS program will be changed to address deficiencies.
§ 60.5(b).
E1.4. ......................
A policy, process, or procedure specifying how the sponsor will address pro-
posed program changes (for programs that do not meet the minimum re-
quirements as notified by the NSPM) to the NSPM and receive approval
prior to their implementation.
§ 60.5(c).
E1.5. ......................
A policy, process, or procedure specifying how the sponsor will document that
at least one FSTD is used within the sponsor’s FAA-approved flight training
program for the aircraft or set of aircraft at least once within the 12-month
period following the initial or upgrade evaluation conducted by the NSPM
and at least once within each subsequent 12-month period thereafter.
§ 60.7(b)(5).
E1.6. ......................
A policy, process, or procedure specifying how the sponsor will document that
at least one FSTD is used within the sponsor’s FAA-approved flight training
program for the aircraft or set of aircraft at least once within the 12-month
period following the first continuing qualification evaluation conducted by
the NSP and at least once within each subsequent 12-month period there-
after.
§ 60.7(b)(6).
E1.7. ......................
A policy, process, or procedure specifying how the sponsor will obtain an an-
nual written statement from a qualified pilot (who has flown the subject air-
craft or set of aircraft during the preceding 12-month period) that the per-
formance and handling qualities of the subject FSTD represents the subject
aircraft or set of aircraft (within the normal operating envelope). Required
only if the subject FSTD is not used in the sponsor’s FAA-approved flight
training program for the aircraft or set of aircraft at least once within the
preceding 12-month period.
§ 60.5(b)(7) and
§ 60.7(d)(2).
E1.8. ......................
A policy, process, or procedure specifying how independent feedback (from
persons recently completing training, evaluation, or obtaining flight experi-
ence; instructors and check airmen using the FSTD for training, evaluation,
or flight experience sessions; and FSTD technicians and maintenance per-
sonnel) will be received and addressed by the sponsor regarding the FSTD
and its operation.
§ 60.9(b)(1).
E1.9. ......................
A policy, process, or procedure specifying how and where the FSTD SOQ will
be posted, or accessed by an appropriate terminal or display, in or adjacent
to the FSTD.
§ 60.9(b)(2).
E1.10. ....................
A policy, process, or procedure specifying how the sponsor’s management
representative (MR) is selected and identified by name to the NSPM.
§ 60.9(c) and Appendix E,
paragraph (d).
E1.11. ....................
A policy, process, or procedure specifying the MR authority and responsibility
for the following:
§ 60.9(c)(2), (3), and (4).
E1.11.a. .................
Monitoring the on-going qualification of assigned FSTDs to ensure all matters
regarding FSTD qualification are completed as required by this part.
E1.11.b. .................
Ensuring that the QMS is properly maintained by overseeing the QMS poli-
cies, practices, or procedures and modifying as necessary.
VerDate Mar<15>2010
20:48 Jan 30, 2014
Jkt 232047
PO 00000
Frm 00382
Fmt 8010
Sfmt 8002
Q:\14\14V2.TXT
ofr150
PsN: PC150