Previous Page | Page 383 | Next Page |
373
Federal Aviation Administration, DOT
Pt. 60, App. E
T
ABLE
E1—FSTD Q
UALITY
M
ANAGEMENT
S
YSTEM
—Continued
Entry No.
QPS requirement
Information
(reference)
E1.11.c. ..................
Regularly briefing sponsor’s management on the status of the on-going FSTD
qualification program and the effectiveness and efficiency of the QMS.
E1.11.d. .................
Serving as the primary contact point for all matters between the sponsor and
the NSPM regarding the qualification of assigned FSTDs.
E1.11.e. .................
Delegating the MR assigned duties to an individual at each of the sponsor’s
locations, as appropriate.
E1.12. ....................
A policy, process, or procedure specifying how the sponsor will:
§ 60.13; QPS Appendices
A, B, C, and D.
E1.12.a. .................
Ensure that the data made available to the NSPM (the validation data pack-
age) includes the aircraft manufacturer’s flight test data (or other data ap-
proved by the NSPM) and all relevant data developed after the type certifi-
cate was issued (e.g., data developed in response to an airworthiness di-
rective) if the data results from a change in performance, handling qualities,
functions, or other characteristics of the aircraft that must be considered for
flight crewmember training, evaluation, or experience requirements.
E1.12.b. .................
Notify the NSPM within 10 working days of becoming aware that an addition
to or a revision of the flight related data or airplane systems related data is
available if this data is used to program or operate a qualified FSTD.
E1.12.c. ..................
Maintain a liaison with the manufacturer of the aircraft being simulated (or
with the holder of the aircraft type certificate for the aircraft being simulated
if the manufacturer is no longer in business), and if appropriate, with the
person who supplied the aircraft data package for the FFS for the purposes
of receiving notification of data package changes.
E1.13. ....................
A policy, process, or procedure specifying how the sponsor will make avail-
able all special equipment and qualified personnel needed to conduct tests
during initial, continuing qualification, or special evaluations.
§ 60.14.
E1.14. ....................
A policy, process, or procedure specifying how the sponsor will submit to the
NSPM a request to evaluate the FSTD for initial qualification at a specific
level and simultaneously request the TPAA forward a concurring letter to
the NSPM; including how the MR will use qualified personnel to confirm the
following:
§ 60.15(a)–(d); § 60.15(b);
§ 60.15(b)(i);
§ 60.15(b)(ii);
§ 60.15(b)(iii).
E1.14.a. .................
That the performance and handling qualities of the FSTD represent those of
the aircraft or set of aircraft within the normal operating envelope.
E1.14.b. .................
The FSTD systems and sub-systems (including the simulated aircraft sys-
tems) functionally represent those in the aircraft or set of aircraft.
E1.14.c. ..................
The flight deck represents the configuration of the specific type or aircraft
make, model, and series aircraft being simulated, as appropriate.
E1.15. ....................
A policy, process, or procedure specifying how the subjective and objective
tests are completed at the sponsor’s training facility for an initial evaluation.
§ 60.15(e).
E1.16. ....................
A policy, process, or procedure specifying how the sponsor will update the
QTG with the results of the FAA-witnessed tests and demonstrations to-
gether with the results of the objective tests and demonstrations after the
NSPM completes the evaluation for initial qualification.
§ 60.15(h).
E1.17. ....................
A policy, process, or procedure specifying how the sponsor will make the
MQTG available to the NSPM upon request.
§ 60.15(i).
E1.18. ....................
A policy, process, or procedure specifying how the sponsor will apply to the
NSPM for additional qualification(s) to the SOQ.
§ 60.16(a);
§ 60.16(a)(1)(i); and
§ 60.16(a)(1)(ii).
E1.19. ....................
A policy, process, or procedure specifying how the sponsor completes all re-
quired Attachment 2 objective tests each year in a minimum of four evenly
spaced inspections as specified in the appropriate QPS.
§ 60.19(a)(1) QPS Appen-
dices A, B, C, or D.
E1.20. ....................
A policy, process, or procedure specifying how the sponsor completes and
records a functional preflight check of the FSTD within the preceding 24
hours of FSTD use, including a description of the functional preflight.
§ 60.19(a)(2) QPS Appen-
dices A, B, C, or D.
VerDate Mar<15>2010
20:48 Jan 30, 2014
Jkt 232047
PO 00000
Frm 00383
Fmt 8010
Sfmt 8002
Q:\14\14V2.TXT
ofr150
PsN: PC150
Previous Page | Page 383 | Next Page |